IBM Books

Nways Multiprotocol Access Services
Protocol Configuration and Monitoring
Reference Version 3.3 Volume 2


Table of Contents

Figures

Tables

Notices

Notice to Users of Online Versions of This Book

Trademarks

Preface

  • About the Software
  • Conventions Used in This Manual
  • Library Overview
  • Summary of Changes for the IBM 2216 Software Library
  • Network Utility
  • Software Features Supported by Network Utility
  • Getting Help
  • Exiting a Lower Level Environment
  • Using APPN

  • What is APPN?
  • Peer-to-Peer Communications
  • APPN Node Types
  • What APPN Functions Are Implemented on the Router?
  • APPN Network Node Optional Features
  • High-Performance Routing
  • Dependent LU Requester (DLUR)
  • APPN Connection Network
  • Branch Extender
  • Extended Border Nodes
  • Branch Extender vs. Extended Border Node
  • Managing a Network Node
  • Entry Point Capabilities for APPN-related Alerts
  • SNMP Capabilities for APPN MIBs
  • Topology Database Garbage Collection
  • Configurable Held Alert Queue
  • Implicit Focal Point
  • Dynamic Definition of Dependent LUs (DDDLU)
  • Host-initiated Dynamic Dependent LU Definition
  • TN3270E Server
  • Support for Subarea SNA Connections from the TN3270E Server to the Host
  • Enterprise Extender Support for HPR over IP
  • Supported DLCs
  • Router Configuration Process
  • Configuration Changes That Require the APPN Function to Restart
  • Configuration Requirements for APPN
  • Configuring the Router as an APPN Network Node
  • Configuring Branch Extender
  • Configuring Extended Border Nodes
  • High-Performance Routing
  • DLUR
  • Configuring Focal Points
  • Configuring Held Alert Queue Size
  • Defining Transmission Group (TG) Characteristics
  • Calculating APPN Routes Using TG Characteristics
  • COS Options
  • APPN Node Tuning
  • Node Service (Traces)
  • APPN Trace Enhancements
  • Accounting and Node Statistics
  • DLUR Retry Algorithm
  • APPN Implementation on the Router Using DLSw
  • APPN Frame Relay BAN Connection Network Implementation
  • Port Level Parameter Lists
  • Link Level Parameter Lists
  • LU Parameter List
  • Node Level Parameter Lists
  • APPN Configuration Notes
  • Configuring a Permanent Circuit Using ISDN
  • Configuring APPN Over Dial on Demand Circuits
  • Configuring WAN Reroute
  • Configuring WAN Restoral
  • Configuring V.25bis
  • Configuring APPN Over ATM
  • Configuring APPN Using SDLC
  • Configuring APPN Over X.25
  • Configuring APPN Over Frame Relay
  • Configuring APPN Over Frame Relay BAN
  • Configuring APPN Over MPC+
  • Configuring TN3270E Using DLUR
  • Configuring TN3270E Using a Subarea Connection
  • Configuring Enterprise Extender Support for HPR Over IP
  • Configuring Connection Networks over HPR over IP
  • Configuring an Extended Border Node
  • Configuring and Monitoring APPN

  • Accessing the APPN Configuration Process
  • APPN Configuration Command Summary
  • APPN Configuration Command Detail
  • Enable/Disable
  • Set
  • Add
  • Delete
  • List
  • Activate_new_config
  • TN3270E
  • Monitoring APPN
  • Accessing the APPN Monitoring Commands
  • APPN Monitoring Commands
  • Activate
  • Aping
  • Deactivate
  • Dump
  • List
  • Memory
  • Restart
  • Stop
  • Test
  • TN3270E
  • Transmit
  • Using AppleTalk Phase 2

  • Basic Configuration Procedures
  • Enabling Router Parameters
  • Setting Network Parameters
  • AppleTalk over PPP
  • AppleTalk 2 Zone Filters
  • General Information
  • Why ZoneName Filters?
  • How Do You Add Filters?
  • Sample Configuration Procedures
  • Configuring and Monitoring AppleTalk Phase 2

  • Accessing the AppleTalk Phase 2 Configuration Environment
  • AppleTalk Phase 2 Configuration Commands
  • Add
  • Delete
  • Disable
  • Enable
  • List
  • Set
  • Accessing the AppleTalk Phase 2 Monitoring Environment
  • AppleTalk Phase 2 Monitoring Commands
  • Atecho
  • Cache
  • Clear Counters
  • Counters
  • Dump
  • Interface
  • Using VINES

  • VINES Overview
  • VINES Over Router Protocols and Interfaces
  • Service and Client Nodes
  • VINES Network Layer Protocols
  • VINES Internet Protocol (VINES IP)
  • Routing Update Protocol (RTP)
  • Internet Control Protocol (ICP)
  • VINES Address Resolution Protocol (VINES ARP)
  • Basic Configuration Procedures
  • Running Banyan VINES on the Bridging Router
  • Running Banyan VINES over WAN Links
  • Configuring and Monitoring VINES

  • Accessing the VINES Configuration Environment
  • VINES Configuration Commands
  • Add
  • Delete
  • Disable
  • Enable
  • List
  • Set
  • Accessing the VINES Monitoring Environment
  • VINES Monitoring Commands
  • Counters
  • Dump
  • Route
  • Using DNA IV

  • DNA IV Overview
  • DNA IV Terminology and Concepts
  • Routing
  • Routing Tables
  • Area Routers
  • Configuring Routing Parameters
  • IBM's Implementation of DNA IV
  • Managing Traffic Using Access Control
  • Managing Traffic Using Area Routing Filters
  • Configuring DNA IV
  • Configuring and Monitoring DNA IV

  • DNA IV Configuration and Monitoring Commands
  • Define/Set
  • Purge
  • Set
  • Show
  • Show/List
  • Zero
  • Using OSI/DECnet V

  • OSI Overview
  • NSAP Addressing
  • IDP
  • DSP
  • IS-IS Addressing Format
  • GOSIP Version 2 NSAPs
  • Multicast Addresses
  • OSI Routing
  • IS-IS Protocol
  • IS-IS Areas
  • IS-IS Domain
  • IS to IS Hello (IIH) Message
  • L1 IIH Message
  • L2 IIH Message
  • Point-to-Point IIH Message
  • Designated IS
  • Link State Databases
  • Routing Tables
  • Address Prefix Encoding
  • Authentication Passwords
  • ESIS Protocol
  • Hello Message
  • End System Hello (ESH) Message
  • Intermediate System Hello (ISH) Messages
  • X.25 Circuits for DECnet V/OSI
  • Routing Circuits
  • Filters
  • Templates
  • Link Initialization
  • OSI/DECnet V Configuration
  • Basic Configuration Procedure
  • Configuring OSI Over an Ethernet or a Token-Ring or FDDI LAN
  • Configuring OSI Over X.25 or Frame Relay
  • Configuring a DNA V Router for a DNA IV Environment
  • DNA IV and DNA V Algorithm Considerations
  • Configuring and Monitoring OSI/DECnet V

  • Accessing the OSI Configuration Environment
  • OSI/DECnet V Configuration Commands
  • Add
  • Change
  • Clear
  • Delete
  • Disable
  • Enable
  • List
  • Set
  • Accessing the OSI/DECnet V Monitoring Environment
  • OSI/DECnet V Monitoring Commands
  • Addresses
  • Change Metric
  • CLNP-Stats
  • Designated-router
  • DNAV-info
  • ES-Adjacencies
  • ES-IS-Stats
  • IS-Adjacencies
  • IS-IS-Stats
  • L1-Routes
  • L2-Routes
  • L1-Summary
  • L2-Summary
  • L1-Update
  • L2-Update
  • Ping-1139
  • Route
  • Send (Echo Packet)
  • Subnets
  • Toggle (Alias/No Alias)
  • Traceroute
  • Using NHRP

  • Next Hop Resolution Protocol (NHRP) Overview
  • Benefits of NHRP and the IBM implementation
  • Performance Characteristics
  • Examples of NHRP Configurations
  • NHRP Implementation
  • Configuration Parameters
  • Configuring and Monitoring NHRP

  • Accessing the NHRP Configuration Process
  • NHRP Configuration Commands
  • Enable NHRP
  • Disable NHRP
  • Advanced Config
  • List
  • NHRP Advanced Configuration Commands
  • Add
  • Delete
  • Change
  • List
  • Set
  • Accessing the NHRP Monitoring Process
  • NHRP Monitoring Commands
  • Box Status
  • Interface Status
  • Statistics
  • Cache
  • Server_purge_cache
  • MIB
  • LANE Shortcuts
  • CONFIG Parameters
  • Reset
  • NHRP Packet Tracing
  • Using IP Version 6 (IPv6)

  • IPv6 Overview
  • IPv6 Comparison with IPv4
  • IPv6 Addressing
  • IPv6 Address Format
  • Text Representation of Address Prefixes
  • IPv6 Header Format
  • IPv6 Minimum MTU
  • IPv6 Mandatory Path MTU Discovery
  • IPv6 Mandatory Security
  • IPv6 Neighbor Discovery Protocol (NDP)
  • Router and Prefix Discovery
  • Address Autoconfiguration
  • Address Resolution
  • Neighbor Unreachability Detection
  • Redirect
  • IPv6 over IPv4 Tunneling
  • Protocol Independent Multicast (PIM)
  • Configuring and Monitoring IPv6

  • Accessing the IPv6 Configuration Environment
  • IPv6 Configuration Commands
  • Add
  • Change
  • Delete
  • Disable
  • Enable
  • List
  • Move
  • Set
  • Update
  • Update Packet-filter Commands
  • Accessing the IPv6 Monitoring Environment
  • IPv6 Monitoring Commands
  • Access-control
  • Cache
  • Counters
  • Dump routing tables
  • Interface addresses
  • Internal address
  • Mcast
  • Mld
  • Reset
  • Route
  • Sizes
  • Sniffer
  • Static routes
  • Packet-filter
  • Path-mtu
  • Ping6
  • Traceroute6
  • Tunnels
  • Configuring and Monitoring Neighbor Discovery Protocol (NDP)

  • Accessing the NDP Configuration Environment
  • NDP Configuration Commands
  • Add
  • Change
  • Delete
  • Disable
  • Enable
  • List
  • Set
  • Accessing the NDP Monitoring Environment
  • NDP Monitoring Commands
  • DHCPv6-Relay
  • Dump
  • List
  • Ping6
  • Configuring and Monitoring Protocol Independent Multicast Routing Protocol (PIM)

  • Accessing the PIM Configuration Environment
  • PIM Configuration Commands
  • Delete
  • Disable
  • Enable
  • List
  • Set
  • Accessing the PIM Monitoring Environment
  • PIM Monitoring Commands
  • Dump routing tables
  • Clear
  • Interface
  • Join
  • Leave
  • Mcache
  • Mgroup
  • Mstats
  • Neighbor
  • PIM
  • Summary PIM
  • Ping
  • Reset
  • Traceroute
  • Variables
  • Configuring and Monitoring Routing Information Protocol (RIP6)

  • Accessing the RIP6 Configuration Environment
  • RIP6 Configuration Commands
  • Add
  • Change
  • Delete
  • Disable
  • Enable
  • List
  • Set
  • Accessing the RIP6 Monitoring Environment
  • RIP6 Monitoring Commands
  • List
  • Dump
  • Ping6
  • Reset
  • Traceroute6
  • Appendix A. Packet Sizes

  • General Issues
  • Network-Specific Size Limits
  • Protocol-Specific Size Limits
  • IP Packet Lengths
  • Changing Maximum Packet Sizes
  • Appendix B. List of Abbreviations

    Glossary

    Index


    [ Top of Page | Previous Page | Next Page | Table of Contents | Index ]